Eaton 5130 rack/tower UPS. 1250 VA / 1150W, 2U, 230V, C14
input, (8) C13 output
| General |
| Topology |
Line interactive |
| Catalog Number |
PW5130i1250-XL2U |
| Color |
Black |
| Rating (VA/Watts) |
1250/1150 |
| Diagnostics |
Full system self-test at power up |
| Efficiency |
>94% |
| Dimensions (H x W x D, inches) |
3.4 x 17.4 x 20 |
| Weight (lbs) |
53.6 |
| Warranty |
Three-year factory warranty with online product
registration |
| Rail Kit Included |
Towers stands and 4 post rail kit included with all
units |
| Remote Emergency Power off (REPO) |
Rear deck emergency stop connector (for remote
on/off and power off) |
Contents
(Ships with the following items) |
1 ready-to-go UPS
Software Suite CD
RS-232 Serial Cable
USB Cable
User Guide
Phillips Head Screwdriver
Quick Start Instructions
4-post Rail Kit
Cord-Retention Brackets
Tower pedestals
(2) IEC to IEC Power Cords |
| Electrical Input |
| Connection |
C14 |
| Input Voltage Range |
160-294V (* The high and low thresholds can be user
adjusted using the downloadable UPS Configuration tool) |
| Nominal Voltage |
230 VAC |
| Frequency |
50/60 Hz (auto-sensing) |
| Frequency Range |
47–70 Hz for 50 Hz operation 56.5–70 Hz for 60 Hz
operation |
| Nominal Current |
5.4 A |
| Electrical Output |
| Output Receptacles |
 (8)
C13 |
| On Utility Voltage Regulation |
184-265 Vac |
| On Battery Voltage Regulation |
-10%, +6% of nominal |
| Voltage Wave Shape (On Battery) |
Sine wave |
| Power Factor |
0.9 |
| Efficiency (on Battery) |
0.7 |
| Frequency Regulation |
0.1 Hz |
| Transfer Time |
1 to 4 ms, typical |
| Load Crest Factor |
3:1 |
| Load Segments |
Two individually controlled output receptacles |
| Battery |
| Maximum Number of Battery Packs |
4 |
| Battery Type |
12V/7.2 Ah; sealed, lead-acid; maintenance free |
| Half Load Runtime (in mins) |
15 |
| Full Load Runtime (in mins) |
5 |
| Battery Replacement |
Hot-swappable internal batteries |
| Battery Voltage |
12 V |
| Start On Battery |
Allows start of UPS without utility input |
| Communications |
| LEDs |
13 status-indicating LEDs |
| Communication Ports |
Serial Port RS-232 (RJ45) ports; USB Port As
standard (HID). RS-232 and USB 6-ft communication cables
included |
| Optional Communication Cards |
ConnectUPS-MS network management card and ModBus |
| Power Management Software |
Eaton Software Suite CD-ROM (bundled with UPS) |
| Environmental &
Standards |
| Heat Dissipation (BTU) |
Line: 250, Bat: 1,682 |
| Audible Noise |
Max 45 dBA |
| Operating Temperature |
0˚C (32˚F) to +40˚C (104˚F) |
| Safety markings |
UL1778, UL 497A (data line only); cUL (CAN/CSA
C22.2, No. 107.1); EN 50091-1-1 and IEC 60950 |
| EMC Markings |
EN 50091-2. FCC Part 15 subpart J Class A |
| Markings |
C-Tick; CE, TUV, cUL, UL |
| Storage Temperature |
-15˚C (5˚F) to +50˚C (122˚F) |
| Relative Humidity |
20–95% non-condensing |
| Altitude |
Up to 10,000 ft (3000M) without de-rating |
| Note: Due to continuing product
improvement programs, specifications are subject to
change without notice. |
