• Full featured, off-line UPS power for your electronic equipment
• Battery testing and monitoring
• Overload protection
• Communications capabilities

Liebert PowerSure® Personal Models for:

• Office and home office PC's
• Network workstations
• Network routers, bridges, and hubs
• Point-of-sale terminals
• Other sensitive electronics

PowerSure Personal combines superior filtering of noise and transients, battery back-up, and communications capabilities, in a compact lightweight package. And the microprocessor-based system protects your connected equipment as you use it, with two level overload protection and continuous battery monitoring.

• Four or more minutes of battery back-up, typical, at full load
• EMI/RFI filtering to FCC Class B
• Lightning and surge protection for all outlets
• Stepped sine wave output
• Wide input voltage range
• Automatic battery testing
• Continuous battery monitoring
• Continuous overload monitoring
• Two-year warranty

Advanced overload protection and battery monitoring provide a level of reliability usually not found in UPS units at this price level. It also provides superior performance against noise, transients, lightning and surges, for a full spectrum of protection for your sensitive loads.

In addition, the Personal allows for informative local monitoring, as well as remote monitoring and automatic shutdown capabilities.

With features such as these, you can see why PowerSure Personal is today's best buy in off-line UPS.

Superior Performance

Four or More Minutes of Battery Back-Up, Typical, At Full Load provides ample time to perform an orderly shutdown.

Lightning and Surge Protection that conforms to IEEE/ANSI C62.41 (IEEE 587) Category A (115V) for surge suppression; IEC 801-5 level 3 (230V).

Dual, Full-Time Filtering of Electrical Noise and Transients. EMI and RFI filtering improves power quality to connected equipment during normal operation, meeting FCC (Part 15, Class B) (115V); EN55022 Class B (230V) standards.

Stepped Sinewave Output gives best approximation to sinewave in its class, making it better for computer power supplies.

Wide Input Voltage Range allows you to maximize time on utility power and battery life for when itÕs needed most.

Lightweight/Compact Design makes it ideal for desktop use.

Automatic, Continuous Overload Protection. The UPS monitors for overload on both utility and battery operation, preventing inadvertent shutdown during emergency situations and optimizing run time. Two levels of overload protection to protect your equipment -- Level One: audible and visual alarms; Level Two: the unit will not start, preventing inadvertent damage to the connected load and the UPS.

Continuous Battery Monitoring. PowerSure Personal charges the battery when AC power is supplied (even when the unit is turned off), and monitors the charge level, ensuring that back-up power is available when you need it.

Battery Start Capabilities. PowerSure Personal allows you to start the UPS and the attached equipment from the battery, providing sufficient time to copy a disk, print a document or complete a critical task.

Advance Warning to Plan a Shutdown. Audible and visual alarms immediately warn you of low battery time remaining, allowing time to shut down before battery time runs out.

Alarm Indications are provided for low battery, battery test failure, charger overload/short circuit and overvoltage.
 

Warranty

Two-Year Warranty With Optional Extensions to Five Years. Liebert's standard two-year warranty ensures replacement of your UPS if it experiences problems during the warranty period. Liebert will ship a replacement unit in order to get your system power back on-line as soon as possible. Our warranty extension program allows you to add up to three years to your original warranty, for up to five years of full protection.

Full Time Monitoring with built-in display indicators helps keep you informed of normal and out-of-spec conditions from the front display panel or remotely through SiteNet MultiLink or SiteNet 1 software. The Personal's communications port seamlessly integrates with SiteNet MultiLink shutdown software, offering data protection for one or more computers.

• SiteNet^® MultiLink. Power surveillance and shutdown management software works with your UPS to provide a simple, easy-to-configure computer protection solution in multi-platform, networked environments. The Personal's communications port seamlessly integrates with MultiLink software (available free at www.Liebert.com) offering data protection for one or many computers. The cable needed for connection ships with the UPS.
   
• SiteNet^®1. UPS monitoring and shutdown software prevents unexpected server shutdowns by automatically monitoring UPS activity and closing down protected nodes if utility power remains off.
   
• SiteNet MultiPort. With the MultiPort multiplexer, up to eight computers, servers or workstations, each running SiteNet 1 software, can monitor the status of a single UPS. A ninth port allows monitoring and UPS management with SiteNet 2 monitoring and control software.
   

Optional Equipment

Micro POD Output Distribution and Maintenance Bypass Module. When your computer system can't be without power, even for scheduled UPS maintenance, Liebert Micro POD (Power Output Distribution) ensures continuous uptime. It allows you to manually transfer connected equipment to utility power via a maintenance bypass switch, permitting scheduled service or UPS replacement without power disruption.
 

Home Batteries  UPS Technology Emergency Lighting Battery Chargers Factory Links Contact Us Buy Batteries Online

Power Factor Inc.

800-706-7009

 Our Goal, NO DISSATISFIED CUSTOMERS!

Since 1995

While every precaution has been taken to ensure accuracy and completeness in this literature, Power Factor Inc. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners.