Powersonic Battery Sealed Lead acid Batteries
PS-260 PS-445 PS-490 PS-4100 PS-605 PS-610 PS-612 PS-628 PS-630 PS-632 PS-640 PS-650LF PS-665 PS-670 PS-682 PS-6100 PS-6120 PS-6200 PS-6360F2 PS-6360NB PS-6580 PS-62000 PS-832 PS-1208 PS-1212 PS-1220 PS-1221PC PS-1221S PS-1223 PS-1227 PS-1228 PS-1229 PS-1230 PS-1238 PS-1250F1 PS-1250F2 PS-1270F1 PS1270F2 PS-1282 PS-1290 PS-12100F1 PS-12100F2 PS-12120 PS-12120L PS-12180F2 PS-12180NB PS-12260F2 PS-12260NB PS-12280 PS-12350 PS-12400 PS-12550 PS-12750 PS-121000 PS-121100 PS-121400
Features of Power-Sonic Sealed Lead Acid Batteries
The valve regulated spill proof construction allows trouble-free safe operation in any position. There is no need to add electrolyte, as gases generated during the charge phase are recombined in a unique “oxygen cycle”.
Power-Sonic sealed lead acid batteries can be operated in virtually any orientation without the loss of capacity or electrolyte leakage. However, upside down operation is not recommended.
Long Shelf Life
A low self-discharge rate, up to approximately 3% per month, may allow storage of fully charged batteries for up to a year, depending on storage temperatures, before charging becomes critical. However, we strongly recommend that all batteries should be recharged within six months of receipt as it will enhance their long term life.
Same model batteries may be used in series and/or parallel to obtain choice of voltage and capacity. The same battery may be used in either cyclic or standby applications. Over 80 models available to choose from.
Deep Discharge Recovery
Special separators, advanced plate composition and a carefully balanced electrolyte system ensure that the battery has the ability to recover from excessively deep discharge.
The high watt-hour per dollar value is made possible by the materials used in a sealed lead-acid battery; they are readily available and low in cost.
No special handling precautions or shipping containers, surface or air, are required due to the leak-proof construction.
Power-Sonic batteries utilize state of the art design, high grade materials, and a carefully controlled plate-making process to provide excellent output per cell. The high energy density results in superior power/volume and power/weight ratios.
Low Pressure Valve Regulators
All batteries feature a series of low pressure one-way relief valves. These valves safely release any excessive accumulation of gas inside the battery and then reseal.
High Discharge Rate
Low internal resistance allows discharge currents of up to ten times the rated capacity of the battery. Relatively small batteries may thus be specified in applications requiring high peak currents.
Wide Operating Temperature Range
Power-Sonic batteries may be discharged over a temperature range of -40°C to +60°C (-40°F to + 140°F) and charged at temperatures ranging from -20°C to +50°C (-4°F to +122°F).
The high impact resistant battery case is made of non-conductive ABS plastic. The case materials impart great resistance to shock, vibration, chemicals and heat. Flame Retardant (FR) battery cases and lids are available where the end application dictates.
Long Service Life
PS/PSH and PSG Series: Have a design life of up to five years in standby applications. In cyclical applications up to 1,000 charge/discharge cycles can be expected depending on average depth of discharge. PG Series: Have a design life of up to 10 years in float applications.The information contained within is provided as a service to our customers and is for their information only.
The information and recommendations set forth herein are made in good faith and are believed to be accurate at the date compiled. Power-Sonic Corporation or Power Factor Inc. makes no warranty expressed or implied.