|
Contact Us Toll Free
Buy
batteries on-line
Request Info
 UPS Systems
Batteries
Emergency Lighting
 Battery
Chargers
Battery Storage
Specials!
Service
Lease Info
| |
N4X Series
Rugged,
self-contained emergency lighting unit designed to perform in industrial
environments |
Agency Approvals:
UL listed to standard 924
(Emergency Lighting Equipment)
|
Features
The Dual-Lite N4X Series
is designed for industrial use and is completely maintenance-free. It
features sealed and gasketed construction. The case is constructed of
thermoplastic polyester in a gray finish. The unit contains an SCR
solid-state charger, an automatic transfer circuit, a low-voltage
battery disconnect circuit, a charge indicator and a test switch.
Lighting heads are fully adjustable. The lamp housings are made of
injection-molded, high-impact thermoplastic in a contrasting black
finish. The lamp terminals are coated to resist corrosion and the lamp
head swivel is sealed from the environment. Remote fixtures may be
connected to both the 6- and 12-volt models. See the Product Selector
chart for details.
Specification:
Standard illumination is
provided using glare-free, 7.2-watt, sealed beam lamps especially
designed for emergency lighting. The usual design objective in emergency
lighting is to provide a level of illumination sufficient to allow
people to leave a building in the event of a power failure. For lamp
photometrics, see Data Sheet 60-1600.
Application/Installation:
Sutible for use in heavy
industry where a non-corroding, sealed and gasketed unit is essential.
Units are provided with pre-drilled mounting flanges for wall or beam
mounting. The design permits top conduit entry for power and remotes.
Drilling templates are provided. Connections for remote fixtures are
fused.
|
|
| Detailed
Part Number Information: |
Part Number
Description |
Details |
Specifications |
|
Item Number |
N4X14
Industrial Emergency Lighting Unit |
|
Weight = 20.0Lbs |
N4X14-12V
Industrial Emergency Lighting Unit |
|
Weight = 20.0Lbs |
N4X2
Industrial Emergency Lighting Unit |
|
Weight = 10.0Lbs |
N4X4
Industrial Emergency Lighting Unit |
|
Weight = 13.0Lbs |
N4X7
Industrial Emergency Lighting Unit |
|
Weight = 15.0Lbs |
|
Accessories |
40G
Wire Guard |
|
Weight = 11.0Lbs |
MP-100
Mounting Plate Single head, round |
|
Weight = 0.5Lbs |
MP-101
Mounting Plate Twin head, round |
|
Weight = 0.5Lbs |
|
