Easy to install
	Capacities up to 69 watts for powering remote lighting fixtures
	6- and 12-volt models
	Semi-recessed “eyeball” style lighting heads
	High-output halogen lamps provided standard
	Lamps provided standard with integral, clear glass, protective lens
	UV-stable thermoplastic housing
	White or black finishes offered
	Snap-together design
	120/277VAC, 60 Hz operation standard (220-240VAC, 50/60 Hz optional)
	Fully automatic, temperature-compensated, solid-state charger
	Choice of three maintenance-free battery types
	Models operate for 90 minutes
	Low-voltage battery disconnect and transformer isolation protection
	Test switch and LED AC-On indicator
	Available with Spectron® self-diagnostic/self-testing electronics option
	Matching remote fixtures
	UL listed, standard 924 (Emergency Lighting)

Specification:
Construction:
Unit: Housing and back plate constructed of flame-rated, UV-stable ABS thermoplastic
Lamp Housings: Constructed of flame-rated, UV-stable, polycarbonate thermoplastic
Finish: Textured bright white or black

Illumination:
Lamp Type: Halogen MR-16 package
Lamp Voltage: 6- or 12-volts
Standard Lamp Wattage: 6V, 5W or 12V, 5W
Rated Lamp Life: 100 hours (all)

Photometrics:
High-Output Halogen Lamp (Horizontal Isofootcandle Distribution) Photometrics measured by independent testing laboratory

Electronics:
Input: 120/277VAC, 60 Hz (standard)
Built-in Protection: Transformer isolation and low-battery voltage disconnect
Charger: Lead-calcium/Pure-lead - Solid-state, constant voltage, current limited type Nickel-Cadmium - Solid-state, constant current type All chargers temperature-compensated to increase battery life
Transfer: Electric relay
Distribution: Dual connection, independently fused terminal board
Battery Recharge Cycle: Per UL time standards
Test Means: Integral test switch
Indicators: LED AC-On indicator

Battery:
Type - Depending on model (see Product Selector),
Maintenance-free, lead-calcium, pure-lead or nickel-cadmium.

Application/Installation:
Unit Wall Mounting: Mounts through keyhole slots and hole in lower center of mounting plate (hardware not included) Wiring: Pre-stripped transformer connection leads provided. All AC connections made inside unit housing. Fused distribution board provided for connection of remote lighting fixtures Operating Temperature Range Standard models: 20° - 30°C Damp location models: 0° - 40°C