Liteforms LN4X
Series
UL 50 type 4X
exit signs for indoor/outdoor use
Agency Approvals:
Listed to UL Standard 924
UL 50 type 4X
Features
LN4X Series LED exit signs
meet UL 50 type 4X standards; units are watertight, raintight,
corrosion-resistant, suitable for use in wet locations, and for use in
0°C minimum to 40°C maximum temperatures.
LN4X Series LED exit signs utilize NEMA 4X enclosures constructed of
neutral gray, high-impact-resistant, glass-filled polycarbonate with a
clear polycarbonate cover. The cover is secured to the housing by means
of four slotted polyamide screws. An oil-resistant gasket supplied with
the cover provides a watertight and dust-tight seal. 1 /4" mounting
holes for securing the housing to wall surfaces are located under the
four cover screws. Exit letters meet UL 924 requirements. A white trim
plate installs under the housing cover. Letters are offered standard in
a choice of red or green. Directional arrows are snap-in chevron type.
Illumination is provided by long-life, energy-saving LED lamps. Standard
operation is from 120 or 277VAC.
UL 50 type 4X units for indoor/outdoor Suitable for use in wet
locations
Oil-resistant gasket provides watertight dust-tight seal
High-impact, corrosion-resistant polycarbonate and cover
LN4X Series utilizes NEMA 4X enclosures
Easy installation
Bright, even illumination
Exceeds NFPA 101 illumination requirements
Red and green letters
Long-life LED lamps provide over 20 Energy-saving operation
EPA/DOE ENERGY STAR ® compliant
Snap-in chevron type directional arrows
Optional 2-circuit models available
Universal 120/277VAC operation
Emergency Sign Features
Completely self-contained
Fully automatic, solid-state charger
Maintenance-free, nickel-cadmium battery
Operates for a minimum of 2 hours
Automatic battery protection
Test switch
AC On indicator
Specification:
LN4X LED Series exit signs
are supplied with energy-saving LED lamp assemblies that allow operation
from 120 or 277VAC. All models meet UL 924 requirements for exit face
illumination and color contrast ratio and exceed NFPA 101 illumination
requirements.
LED lamp assemblies are arranged to provide a very evenly illuminated
exit legend. Average useful life exceeds 20 years under normal operating
conditions. LED lamp assemblies in emergency models provide illumination
in AC and battery power modes.
Application/Installation:
Suitable for
indoor/outdoor applications with wet or dusty environments requiring
corrosion-resistant, UL 50 type 4X exit signs with energy-saving,
long-life LED lamp assemblies.
LN4X LED Series exit signs are designed to mount to walls through four 1
/4" integral mounting holes in the unit housing. Mounting hardware
supplied by others. Units must be surface wired for utility power input.
Housings are easily drilled or punched to accept sealed conduit hubs
(supplied by others).
Detailed
Part Number Information:
Part Number
Description
Details
Specifications
Item Number
LN4XGW
LED Exit Signs
120/277VAC
Letters -
Green / Stencil - White / Housing - White
Weight = 6.0Lbs
LN4XRW
LED Exit Signs
120/277VAC
Letters -
Red / Stencil - White / Housing - White
Weight = 6.0Lbs
LN4XRWE
LED Exit Signs
120/277VAC
Letters -
Red / Stencil - White / Housing - White
Weight = 9.0Lbs
LNRXGWE
LED Exit Signs
120/277VAC
Letters -
Green / Stencil - White / Housing - White
Weight = 9.0Lbs
2526 Manana Dr – Suite 102 – Dallas – Texas – 75220
NO DISSATISFIED CUSTOMERS!
Since 1995
While every precaution has been taken to
ensure accuracy and completeness in this literature, Power Factor Inc. assumes
no responsibility, and disclaims all liability for damages resulting from use of
this information or for any errors or omissions. Specifications subject to
change without notice.
All names referred to are trademarks or registered trademarks of their
respective owners.
UPS Systems
Emergency Lighting
Battery
Chargers
Battery Storage
