Liteforms LM Series

800-706-7009

Home • Up • Delite Series • EXT-122-EM series • EZ-2 Series • EZ-2R Series • LITE 2™ Series • Liteforms LM Series • Liteforms LZ High Capacity Series • Liteforms LZ Series • T-Bar Series • Accessories & Mounting • Vandal Resistant Shields

Buy batteries on-line

Battery chargers, rectifiers, dc power systems by SENS Battery Chargers

Click for more about the Battery Rack™ 20 with Tester (Grey) Battery Storage

Specials!

Service

Lease Info

Liteforms LM Series Commercial/Industrial High-Capacity Emergency Lighting Units
Agency Approvals: UL 924 and NFPA-101 (all models) UL Damp Location Listed (designated models only)

Features
Commercial/Industrial High-Capacity Emergency Lighting Units. Corrosion-resistant, rugged metal units featuring fully adjustable lighting heads and easy installation. Most models have additional battery capacity for powering remote fixtures or extended run times. Available in standard and damp location models.

	Easy to install Long-life, maintenance-free, lead-calcium batteries (1)
	6- & 12-volt models
	Fully adjustable, glare-free lighting heads
	Lighting heads supplied top mounted; relocatable to side mounting position
	Available with additional unit-mounted lighting head
	Available without lighting heads for powering remote mounted fixtures
	White, corrosion-resistant housing and cover
	120/277VAC, 60 Hz operation standard (220-240VAC, 50/60 Hz optional)
	Keyhole universal mounting slots allow easy installation of chassis to electrical box
	Low-voltage battery disconnect and transformer isolation protection
	Test switch and AC-On indicator
	Matching remote fixtures available
	Damp location listed models available
	Optional Spectron® self-diagnostic/self-testing electronics
	Models operate for 90 minutes
	UL Listed

Specification:
Illumination:
Lamp type: Incandescent PAR 36 sealed beam type
Lamp Voltage: 6- or 12-volt, depending on model
Lamp Wattage: 7.2W
Rated Lamp Life: 100 hours
Photometrics 6- and 12-volt, 7.2W incandescent lamp (horizontal isofootcandle distribution)

Electronics:
Input: 120/277VAC, 60 Hz (standard)
Built in-Protection: Transformer isolation and low-battery voltage disconnect
Charger: Fully automatic, constant voltage, current limited
Transfer: Electric relay
Distribution: Fused leads
Battery Recharge Cycle: Per UL time standards
Test Means: Integral test switch
Indicators: LED AC-ON indicator

Battery:
Type: Maintenance-free lead-calcium (except LM2, LM16; pure lead)
Power Consumption Maximum: 15 watts (all models)

Application/Installation:
Unit Wall Mounting: Mounts through universal knockout pattern to standard electrical boxes up to 4" square. Also, mounts to wall surface through keyhole mounting slots.

Wiring: Pre-stripped transformer leads provided. All AC connections made inside unit housing. Fused distribution board provided for connection of remote lighting fixtures

Detailed Part Number Information:
Part Number Description	Details	Specifications
Item Number
LM110 High Capacity Emergency Lighting Unit	Standard Model, 6 volt	Weight = 26.5Lbs
LM110-12V High Capacity Emergency Lighting Unit	Standard Model, 12 volt	Weight = 26.5Lbs
LM110-12VNY High Capacity Emergency Lighting Unit	New York Approved, 12 volt	Weight = 26.5Lbs
LM110NY High Capacity Emergency Lighting Unit	New York Approved, 6 volt	Weight = 26.5Lbs
LM112D High Capacity Emergency Lighting Unit	Damp Locations, 6 volt	Weight = 27.8Lbs
LM112D-12V High Capacity Emergency Lighting Unit	Damp Locations, 12 volt	Weight = 27.8Lbs
LM130 High Capacity Emergency Lighting Unit	Standard Model, 6 volt	Weight = 27.8Lbs
LM130-12V High Capacity Emergency Lighting Unit	Standard Model, 12 volt	Weight = 27.8Lbs
LM130-12VNY High Capacity Emergency Lighting Unit	New York Approved, 12 volt	Weight = 27.8Lbs
LM130NY High Capacity Emergency Lighting Unit	New York Approved, 6 volt	Weight = 27.8Lbs
LM16 High Capacity Emergency Lighting Unit	Standard Model, 6 volt	Weight = 8.4Lbs
LM16NY High Capacity Emergency Lighting Unit	New York Approved, 6 volt	Weight = 8.74Lbs
LM2 High Capacity Emergency Lighting Unit	Standard Model, 6 volt	Weight = 8.4Lbs
LM24CH High Capacity Emergency Lighting Unit	Chicago Approved, 6 volt	Weight = 10.6Lbs
LM28D High Capacity Emergency Lighting Unit	Damp Locations, 6 volt	Weight = 10.6Lbs
LM33 High Capacity Emergency Lighting Unit	Standard Model, 6 volt	Weight = 10.6Lbs
LM33NY High Capacity Emergency Lighting Unit	New York Approved, 6 volt	Weight = 10.6Lbs
LM34D High Capacity Emergency Lighting Unit	Damp Locations, 6 volt	Weight = 11.5Lbs
LM34D-12V High Capacity Emergency Lighting Unit	Damp Locations, 12 volt	Weight = 11.6Lbs
LM36-12VCH High Capacity Emergency Lighting Unit	Chicago Approved, 12 volt	Weight = 18.3Lbs
LM36CH High Capacity Emergency Lighting Unit	Chicago Approved, 6 volt	Weight = 18.3Lbs
LM40 High Capacity Emergency Lighting Unit	Standard Model, 6 volt	Weight = 11.5Lbs
LM40-12V High Capacity Emergency Lighting Unit	Standard Model, 12 volt	Weight = 11.6Lbs
LM40-12VNY High Capacity Emergency Lighting Unit	New York Approved, 12 volt	Weight = 11.6Lbs
LM40NY High Capacity Emergency Lighting Unit	New York Approved, 6 volt	Weight = 11.5Lbs
LM46D High Capacity Emergency Lighting Unit	Damp Locations, 6 volt	Weight = 18.3Lbs
LM46D-12V High Capacity Emergency Lighting Unit	Damp Locations, 12 volt	Weight = 18.3Lbs
LM54 High Capacity Emergency Lighting Unit	Standard Model, 6 volt	Weight = 18.4Lbs
LM54-12V High Capacity Emergency Lighting Unit	Standard Model, 12 volt	Weight = 18.3Lbs
LM54-12VNY High Capacity Emergency Lighting Unit	New York Approved, 12 volt	Weight = 18.3Lbs
LM54NY High Capacity Emergency Lighting Unit	New York Approved, 6 volt	Weight = 18.4Lbs
LM56D High Capacity Emergency Lighting Unit	Damp Locations, 6 volt	Weight = 18.9Lbs
LM56D-12V High Capacity Emergency Lighting Unit	Damp Locations, 12 volt	Weight = 18.9Lbs
LM66 High Capacity Emergency Lighting Unit	Standard Model, 6 volt	Weight = 18.9Lbs
LM66-12V High Capacity Emergency Lighting Unit	Standard Model, 12 volt	Weight = 18.9Lbs
LM66-12VNY High Capacity Emergency Lighting Unit	New York Approved, 12 volt	Weight = 18.9Lbs
LM66NY High Capacity Emergency Lighting Unit	New York Approved, 6 volt	Weight = 18.9Lbs
LM68D High Capacity Emergency Lighting Unit	Damp Locations, 6 volt	Weight = 21.0Lbs
LM68D-12V High Capacity Emergency Lighting Unit	Damp Locations, 12 volt	Weight = 21.0Lbs
LM80 High Capacity Emergency Lighting Unit	Standard Model, 6 volt	Weight = 21.0Lbs
LM80-12V High Capacity Emergency Lighting Unit	Standard Model, 12 volt	Weight = 21.0Lbs
LM80-12VNY High Capacity Emergency Lighting Unit	New York Approved, 12 volt	Weight = 21.0Lbs
LM80NY High Capacity Emergency Lighting Unit	New York Approved, 6 volt	Weight = 21.0Lbs
LM93D High Capacity Emergency Lighting Unit	Damp Locations, 6 volt	Weight = 26.5Lbs
LM93D-12V High Capacity Emergency Lighting Unit	Damp Locations, 12 volt	Weight = 26.5Lbs
Accessories
40G Wire Guard		Weight = 11.0Lbs

Home - 9 Power Problems - Problems with Power - APC - Powerware - MinuteMan - MGE - Liebert - Batteries - Chargers / Rectifiers - Emergency Lighting - Service - Factory Links

Power Factor Inc.

2526 Manana Dr – Suite 102 – Dallas – Texas – 75220

NO DISSATISFIED CUSTOMERS!

Since 1995

While every precaution has been taken to ensure accuracy and completeness in this literature, Power Factor Inc. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners.