Features
AC and open face signs for
special wording applications
AC Models
Emergency Models
Specification:
Construction
Sign: Flame-rated, UV stable thermoplastic housing with
matching canopy and steel face(s)
Sign Finish: Bright white standard (black optional)
Diffuser: Fiberglass reinforced polyester
Diffuser Color: Red or Green
Face Design
Faceplate: Open face for special wording applications
Directional Arrows: Snap-out chevron type
Illumination
AC Lamps: Two 145V, 15T6 incandescent
DC Lamps: Two 6V, 3.7W wedge base incandescent (emergency
models only)
Rated AC Lamp Life: 5,000 hours
Electronics
Input: 120VAC, 60 Hz (all models). 277VAC optional on AC
models, standard on emergency models
Emergency Operation Module (Externally Mounted)
Charger: Voltage regulated, thermally compensated
Built-in Protection: Reverse polarity, short circuit, brownout,
AC lockout and low battery voltage protection
Recharge Cycle: Per acceptable time standards
Test Means: Integral test switch
Indicators: AC-On indicator
Battery Type: 6 Volt Lead-Calcium
Power Consumption (Max)
AC Models: 24 Watts (120 or 277VAC)
Emergency Models: 28 Watts (120 or 277VAC)
Application/Installation:
Mounting: Sign
mounts to 31/2", 4" octagon, or 4" square outlet boxes and standard
plaster rings.
Wall Installations: Back plate provides a knockout pattern for
mounting to outlet box. Knockouts provided for securing housing to wall
surface.
Ceiling or End Installations: Mounting canopy provided with all
models. Canopy mounts to outlet boxes by means of mounting plate
supplied.
Wiring: Pre-stripped AC input pigtail leads provided.
Operating Temperature Range: 20° to 30°C.
|
