Self-contained emergency power units
	Models operate up to four hours
	Long-life, lead-calcium or nickel-cadmium batteries
	Fully automatic, solid-state charger
	Standard operation from 120 or 277VAC
	Traditional dark brown enamel finish
	Models for loads up to 350 watts
	Test switch, AC pilot light
	Automatic battery protection (LVD)
	Remote capabilities

Specification:
Unit is supplied standard without lighting heads. Knockouts are provided for mounting up to three heads on unit. The usual design objective in emergency lighting is to provide level of illumination sufficient to allow people to leave building in the event of a power failure. For lamp photometrics, see Data Sheet 60-1600.

Application/Installation:
For use in industrial, commercial and institutional systems requiring long wiring distances.

The unit may be mounted directly to the wall by means of two keyhole slots. A mounting bracket or a shelf in beige finish are available options. Knockouts are provided for 1 /2" or 3 /4" conduit connections. Piano-hinged top is incorporated for battery maintenance. Connections for remote fixture wiring are fused. A strain relief knockout is also provided for standard three-conductor cord.