TCS Series

800-706-7009

Series Features

TCS

	Integrated Solid State System
	Three-Rate, Controlled, Automatic Charger ~ No manual battery recycling
	Low Voltage Battery Cutoff
	Brownout Sensitivity
	Fused AC Input & DC Output Circuit Protection
	Single Voltage Transformer for 120 VAC Operation
	Maximum Input Rating 120VAC, 60 Hz, 0.50 Amps 277VAC, 60 Hz, 0.23 Amps

Shown in Standard Two Tone Beige &
Cocoa Finish

Rugged steel construction is combined with state-of-the-art LED status indicators, making the TCS Series an ideal choice for demanding industrial applications. A slide-out modular control assembly allows for quick and easy product upgrades.

Par-46 Sealed Beam Lamps
STD Lamps: See Unit Information

	Sealed Lead Calcium Battery
	6 or 12 Volt Operation
	Maintenance Free

	Rugged 20 gauge Steel Housing
	Top End Battery Access
	Full Length Piano Hinge With Lock Hasp
	Integral Carrying Handles
	Two Tone Powder Coat Finish (Beige & Cocoa) Standard
	Slide Out Control Chassis
	Test Switch
	Battery Capacity Indicator: Incremental LED indicates current battery charge/discharge status
	Amber (AC On) LED Indicator
	UL Listed

Height:	20.5"
Width:	18.5"
Depth:	8.5"

Unit Information (Watts per hour)

Model #	STD LAMP WATT	1.5	2	3	4	5	6	7	8	Replacement Battery
2TC6S50***	25	120	90	60	45	36	30	26	22	(1) S650
2TC6S72***	25	120	120	100	75	60	50	43	38	(2) S636
2TC6S72DO	25	200	150	100	75	60	50	43	38	(2) S636
2TC6S100***	25	120	120	120	90	72	60	51	45	(2) S650
2TC6S100DO***	25	225	169	120	90	72	60	51	45	(2) S650
2TC12S20***	35	125	94	63	47	38	31	27	23	(1) S1220
2TC12S36***	35	200	150	100	75	60	50	43	38	(2) S636
2TC12S50***	35	240	180	120	90	72	60	51	45	(2) S650
2TC12S72***	35	240	240	200	150	120	100	86	75	(4) S636
2TC12S72DO***	35	400	300	200	150	120	100	86	75	(4) S636

***Chicago Code Approved

Illumination is rated to 87.5% of nominal system voltage and recharge to full capacity within 24 hours.
NEC requires 1.5 hours of emergency illumination.

The DO model provides 2 separately fused DC (20A) output circuits
for increased system capacity, without the use of additional batteries

Quik-Chek

Factory Options

-277	277 VAC Input
-GY	Industrial Grey Finish
-P2	Cord & Plug for 120 VAC Input
-QC	Quik Chek Remote Test & Time Delay
-TD	Time Delay Adjusts 1-60 Min.
-BDS	Battery Disconnect Switch
-**	Special Lamp Wattage

Ordering Information

H
Halogen Lamp Prefix*

2
Lamp Heads on Unit

TC
Series

6
DC Battery Voltage

S
Battery Type
S~Sealed

50
Battery
Amp/Hour

-BDS
Options

* Par-36 Sealed Beam

Home - 9 Power Problems - Problems with Power - APC - Powerware - MinuteMan - MGE - Liebert - Batteries - Chargers / Rectifiers - Emergency Lighting - Service - Factory Links

Power Factor Inc.

2526 Manana Dr – Suite 102 – Dallas – Texas – 75220

NO DISSATISFIED CUSTOMERS!

Since 1995

While every precaution has been taken to ensure accuracy and completeness in this literature, Power Factor Inc. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners.