Multi-Rate, Controlled, Automatic Charger ~ No manual battery
recycling
Lock Out (Automatic Battery Connect)
Low Voltage Battery Cutoff
Brownout Sensitivity
Dual Voltage Transformer for
120/277 VAC Operation
Maximum Input Rating
120VAC, 60 Hz, .30 A
277VAC, 60 Hz, .13 A
An attractive alternative to wall mounted products, the SQ Series offers an
appealing housing suitable for surface or recessed installation.
Halogen Bi Pin
STD Lamp: 6 Volt ~ 7 Watt
Sealed Lead Calcium Battery
6 Volt Operation
Maintenance Free
Architectural Design
Surface Mount
20 Gauge Steel Housing
Prismatic Diffuser
Matte White Baked Enamel Finish
Red (Power On) LED Indicator
Test Switch
Height:
9.00"
Width:
9.00"
Depth:
4.00"
Unit Information (Watts per hour)
Model #
STD LAMP WATT
1.5
2
3
4
5
6
7
8
Replacement Battery
SQ6S5
7
12
9
6
~
~
~
~
~
(1) S65
SQ6S10
7
24
18
12
~
~
~
~
~
(1) S610SL
SQ6S00
7
~
~
~
~
~
~
~
~
Remote
Illumination is rated to 87.5% of nominal system voltage and
recharge to full capacity within 24 hours. NEC requires 1.5 hours of emergency illumination.
2526 Manana Dr – Suite 102 – Dallas – Texas – 75220
800-706-7009
Our Goal, NO DISSATISFIED CUSTOMERS!
Since 1995
While every precaution has been taken
to ensure accuracy and completeness in this literature, Power Factor
Inc. assumes no responsibility, and disclaims all liability for damages
resulting from use of this information or for any errors or omissions.
Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their
respective owners.
