Three-Rate, Controlled, Automatic Charger ~ No manual battery
recycling
Low Voltage Battery Cutoff
Brownout Sensitivity
Fused AC Input & DC Output Circuit Protection
Single Voltage Transformer for
120 VAC Operation
Maximum Input Rating
120VAC, 60 Hz, 1.0 Amps
Shown in Standard Two Tone Beige &
Cocoa Finish
The SHL Series is equipped with solid state electronics and switching
circuitry which reduces component wear and dramatically extends product
life. Par-46 size lamps increase area illumination coverage.
Two Tone Powder Coat Finish (Beige & Cocoa) Standard
Slide Out Control Chassis
Test Switch
Load Cutoff Switch
Voltmeter
Amber (Power On), Red (Hi-Charge), & Green (Trickle Charge) LED
Indicator
UL Listed
Height:
20.5"
Width:
18.5"
Depth:
8.5"
Use No. 22 Mounting Shelf
Unit Information (Watts per hour)
Model #
STD LAMP WATT
1.5
2
3
4
5
6
7
8
Replacement Battery
2SH6L40
21
120
90
60
45
36
30
26
23
(1) L640
2SH6L100
21
120
120
120
120
105
90
75
60
(1) L6100
Illumination is rated to 87.5% of nominal system voltage and
recharge to full capacity within 24 hours. NEC requires 1.5 hours of emergency illumination.
2526 Manana Dr Suite 102 Dallas Texas 75220
NO DISSATISFIED CUSTOMERS!
Since 1995
While every precaution has been taken to
ensure accuracy and completeness in this literature, Power Factor Inc. assumes
no responsibility, and disclaims all liability for damages resulting from use of
this information or for any errors or omissions. Specifications subject to
change without notice.
All names referred to are trademarks or registered trademarks of their
respective owners.
UPS Systems
Emergency Lighting
Battery
Chargers
Battery Storage
