|
Batteries
UPS Technology
Emergency Lighting
Battery Chargers
TVSS
9 Power Problems
Olight Flashlights
Problems with Power
Factory Links
Contact Us
EFB Series
GA Series
HE Series
IL Series
IQ Series
LT Series
PHE Series
S6L Series
SHL Series
SHN Series
TCL Series
TCS Series
800-706-7009
| |
|
|
Seismic Qualifications
- ANSI/IEEE Std. 344-1975
- ANSI/ASME N45.2/N46.2-1977
- NUREG-0800: 9.5.1 Fire Protection Prog.
- ISA: 13 (14-22)-1974
|
Shown in standard two tone beige & cocoa finish
The S6L is our exclusive industrial grade battery system with a seismic
qualification. Designed for use in nuclear and other maximum safety
installations, the refillable lead acid batery provides up to 8 hours of
operation with a 3 lamp head load. |
|
|
- Integrated Solid State System & Switching
- Three-Rate, Controlled, Automatic Charger ~ No manual battery
recycling
- Brownout Sensitivity
- Fused AC Input and DC Output Circuit Protection
- Single Voltage Transformer for
120 VAC Operation
- Maximum Input Rating
120VAC, 60 Hz, 1.0 Amps
|
|
|
- Par-46 Sealed Beam Lamps
STD Lamp: 6 Volt ~ 21 Watt
|
|
|
- Seismic Rated, Lead Acid Battery
- Dry Charge for 5 year shelf life
- Flame Arrestor Vent Caps
- 32 degrees ~ 105 degrees F Operation Range
- 6 Volt Operation
- 8-12 Year Operating Life
|
|
|
- Rugged 20 gauge Steel Housing
- Top End Battery Access
- Battery Viewport
- Full Length Piano Hinge with Lock Hasp
- Seismic Rated Wall Mounting Shelf
- Two Tone Powder Coat Finish (Beige & Cocoa) Standard
- Slide Out Control Chassis
- Test Switch
- Voltmeter
- Load Cutoff Switch
- Amber (Power On), Red (Hi-Charge), & Green (Trickle Charge) Indicators
- Hydrometer Disk Indicators
- UL Listed
|
| Height: |
20.5" |
| Width: |
18.5" |
| Depth: |
8.5" |
|
Unit Information (Watts per hour)
|
Model #
|
STD LAMP WATT
|
1.5
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
Replacement Battery
|
| 2S6L100-80 |
21
|
120
|
120
|
120
|
120
|
105
|
90
|
75
|
60
|
(1) L6100S
|
Illumination is rated to 87.5% of nominal system voltage and
recharge to full capacity within 24 hours.
NEC requires 1.5 hours of emergency illumination.
Factory Options
| -P2 |
Cord & Plug for 120 VAC Input |
| -GY |
Industrial Grey Finish |
Ordering Information
|
2
Lamp Heads on Unit
|
S
Series
|
6
DC Battery Voltage
|
L
Battery Type
(L~Lead Acid)
|
100-80
Battery
Amp/Hour
|
-P2
Options
|
|
