The LT Series is equipped with advanced led battery capacity indicator,
offering increased unit status information while the customized, three-rate
charging circuit extends battery life.
Par-36 Sealed Beam Lamps
STD Lamps: See Unit Information
Sealed Lead Calcium Battery (S)
6 or 12 Volt Operation
Maintenance Free
Rugged 20 gauge Steel Housing
Top End Battery Access
Keyhole or Shelf Mounting
Two Tone Powder coat Finish (Beige & Cocoa) Standard
Top or Side Lamp Mounting
Test Switch
Head Cutoff Switch
Ammeter
Modular Control Chassis
Amber (Power On), Red (Hi-Charge), & Green (Trickle Charge) Indicators
UL Listed
Height:
16.5"
Width:
15.0"
Depth:
6.0"
Unit Information (Watts per hour)
Model #
STD LAMP WATT
1.5
2
3
4
5
6
7
8
Replacement Battery
2LT6L40***
25
120
90
60
45
36
30
26
22
(1) L640
H2LT6L40***
20
120
90
60
45
36
30
26
22
(1) L640
2LT6S50***
25
120
90
60
45
36
30
26
22
(1) S650
H2LT6S50***
20
120
90
60
45
36
30
26
22
(1) S650
2LT12S20***
25
120
90
60
45
36
30
26
22
(1) S1220
H2LT12S20***
12
120
90
60
45
36
30
26
22
(1) S1220
***Chicago Code Approved
Illumination is rated to 87.5% of nominal system voltage and
recharge to full capacity within 24 hours. NEC requires 1.5 hours of emergency illumination.
2526 Manana Dr Suite 102 Dallas Texas 75220
NO DISSATISFIED CUSTOMERS!
Since 1995
While every precaution has been taken to
ensure accuracy and completeness in this literature, Power Factor Inc. assumes
no responsibility, and disclaims all liability for damages resulting from use of
this information or for any errors or omissions. Specifications subject to
change without notice.
All names referred to are trademarks or registered trademarks of their
respective owners.
UPS Systems
Emergency Lighting
Battery
Chargers
Battery Storage
