|
|
.Dynasty C&D Battery Johnson Control UPS12-100 & UPS12-100FR have been replaced by the UPS12-100MR UPS12-100
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
* All dimensions in
inches and (millimeters). All dimensions are for reference only. Contact
a C&D Representative for dimensional information.
|
|
UPS12-100 -
Specifications
|
||||||
|
Cells
Per Unit |
Voltage
Per Unit |
Weight
|
Electrolyte
|
Maximum Discharge
Current
|
Short Circuit
Current
|
Ohms Imped. 60 Hz
|
| 6 | 12.84 | 21 lbs.
10 kg. |
Absorbed H2SO4 SG = 1.300 |
500 Amps | 1750
Amps @ 0.1 sec. |
0.0060 Ohms |
| Capacity | 91.0 watts per cell at the 15 minute rate to 1.67 volts per cell at 77°F (25°C). | |||||
| 26.0 Ah @ 20 hr. rate to 1.75 volts per cell @ 77°F (25°C). | ||||||
| 23.6 Ah @ 10 hr. rate to 1.80 volts per cell @ 20°F (68°C). | ||||||
| Operating Temperature Range | Discharge; -40°F (-40°C) to +160°F (71°C). | Charge; -10°F (-23°C) to +140°F (60°C). (with temperature compensation) | ||||
| Nominal Operating Temperature Range | +74°F (23°C) to +80°F (27°C). | |||||
| Float Charging Voltage | 13.5 to 13.8 VDC/unit Average at 77°F (25°C). | |||||
| Recommended Maximum Charging Current Limit | C/5 amperes (5.2 amperes @ 100% depth of discharge) @ 20 hour rate. | |||||
| Equalization and Cycle Service Charging Voltage | 14.4 to 14.8 VDC/unit Average at 77°F (25°C). | |||||
| Maximum AC Ripple (Charger) | 0.5% RMS or 1.5% P-P of float charge voltage recommended for best results. | |||||
| Maximum voltage allowed = 1.4% RMS (4% P-P). | ||||||
| Maximum current allowed = 1.3 amperes RMS (C/20). | ||||||
| Self Discharge | Dynasty UPS batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required. For higher temperatures the time interval will be shorter. | |||||
| Accessories | Inter unit connectors, racks and cabinet systems are available. | |||||
| Terminal | Flag terminal with 0.22" clearance hole to accept 0.1875" bolt. | |||||
| Terminal Hardware Initial Torque | 40 in.-lbs. (4.5 N-m). | |||||
| Terminal Hardware Annual Retorque | 32 in.-lbs. (3.48 N-m). | |||||

| Note: | Batteries to be mounted with 0.5 in (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. |
Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100 Dynasty C&D Battery Johnson Control UPS12-100
Call for pricing
UPS12-100 Johnson Control Dynasty 12V26AH battery
|