Home Up PSG Advanced Gel Series Solar HPF EZS Solar Systems CZS Solar Systems CRS Solar Systems OCS Outdoor Systems Power Ready IPS CV Series Solar Battery Rack Systems Spill Containment

CV Series 20yr VRLA

The most comprehensive range of VRLA battery systems designed for standby applications that require reliable power and long life.

Applications

Features

Design Life	20 years in float service at 77° F (25° C)
Patented catalyst in each cell	Improves life by lowering float current, reducing grid corrosion and reducing water loss. It°s effects are even more apparent in higher temperatures.
Separators:	Micro porous glass mat, H&V is standard.
Plate protection:	Plate growth without damage is allowed by a collapsible bridge installed in the bottom of the container.
Electrolyte:	Sulphuric acid solution, 1.300 s.g, when fully charged.
Float Voltage:	2.25 volts per cell at 77° F (25° C).
Self-discharge rate:	2% per month at 77° F (25° C).
Intercell connectors:	Plated copper bussbars.
Internal air passages	Aid heat dissipation, and ensure consistent cell temperatures.
Cell fronts	Protected with a transparent, FR plastic cover.
Modules:	Stackable to 8 high while certified to UBC seismic zone 4, Welded steel construction, Internal air passages aid heat dissipation, ensure consistent cell temperatures, Coated with an acid resistant powdered epoxy.

Specifications

Design Life	20 years in float service at 77° F (25° C).
Cell Type	VRLA, with AGM method of electrolyte immobilization.
Grids	Positive - proprietary, lead calcium Negative - lead calcium.
Container and cover	impact resistant polypropylene with FR to UL 94 V0 optional.
Post Seals	2 part epoxy, 2 stage application
Jar to cover seal	heat bonding method (Hardigg Machine).
Leak test method	100% of cells, with pressurized hydrogen
Safety Valve	opens at 2.5 psi, closes at 2 psi, with flame arrestor in each valve. The Bunsen design is used.

General Specifications

384CV525FR Space Saving Installation

Cells
Modules
Connectors
Mounting Base
Module Covers
Terminal Assembly
Lifting Strap
No Oxide Grease
Cell Numbers
Layout Drawing/BOM
Operating Manual
Modules are shipped 4 per pallet, with connectors and accessories on top of the pallets

Lowers the float current draw
Reduces the rate of positive grid corrosion
Converts gases created inside the cell back to water, thus enabling the recombination process to function at maximum efficiency
Prevents the negative plate from becoming discharged while on float charge thus maintaining full cell capacity
Greatly reduces the loss of water through the valve, preventing early failure from cell dryout
It will not allow excessive heat to build if the battery is charged at too high a rate. It will allow the gases to bypass the catalyst if the temperature reaches a set level
The catalyst active material will last the lifetime of the battery under normal operating conditions

Battery Model: To designate the model of the battery system, specify the number of cells in the system, followed by the cell type: i.e. 24CV 1050 would be a 24 cell, 48 volt battery with a capacity of 1050 AH at the 8 hour rate 10 1.75 VPC.
** Overall depth: The module depth includes the module cover. The overall depth including the base assembly is 24” / 610 mm.
*** Overall height: To determine total number of module heights, add the total number of module height plus 4” / 102 mm for the base assembly and 6” / 152.4 mm for the terminal assembly.

No transport restrictions

Surface Transport. Classified as non-hazardous material as relates to DOT-CFR Title 49 part 171-189
Marine transport. Classified as non-hazardous material as per IMDG amendment 27
Air transport. Complies with IATA / ICAO, special provision A67.