|
|
|
Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Flame-arresting one-way pressure-relief vent for safety and long life. | |
| Thermally welded case-to-cover bond to eliminate leakage. | |
| Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance. | |
| Computer-generated grid design optimized for high power density. | |
| UL-recognized component. | |
| Multicell design for economy of installation and maintenance. | |
| Can be mounted in any orientation. | |
| Not restricted for air transport – Complies with IATA/ICAO Special Provision A67. | |
| Not restricted for surface transport – Classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189. | |
| Computer designed lead, low calcium alloy grid for minimal gassing and ease of recycling. | |
| Case and cover available in both standard and flame retardant polypropylene. | |
| Flame retardant polypropylene case and cover compliant with UL 1778 (optional). |
![]()


|
*All dimensions in
inches and (millimeters). All dimensions are for reference only.
|
|
Specifications
|
||||||
|
Cells Per Unit
|
Voltage Per Unit
|
Weight
|
Electrolyte
|
Maximum Discharge
Current
|
Short Circuit
Current
|
Ohms Imped. 60 Hz.
|
|
6
|
12.84
|
57 lbs.
26 kg. |
Absorbed H2SO4
SG = 1.300 |
800 Amps
|
3600 Amps @ 0.1 sec.
|
0.0040 Ohms
|
| Capacity | 282 watts per cell at the 15 minute rate to 1.67 volts per cell at 77°F (25°C). | |||||
| 75 Ah @ 20 hr. rate to 1.75 volts per cell @ 77°F (25°C). | ||||||
| 66 Ah @ 10 hr. rate to 1.80 volts per cell @ 20°C (68°F). | ||||||
| Operating Temperature Range | Discharge; -40°F (-40°C) to +160°F (71°C). | Charge; -10°F (-23°C) to +140°F (60°C). (with temperature compensation) | ||||
| Nominal Operating Temperature Range | +74°F (-23°C) to +80°F (27°C). | |||||
| Float Charging Voltage | 13.5 to 13.8 VDC/ unit Average at 77°F (25°C). | |||||
| Recommended Maximum Charging Current Limit | C/5 amperes (15 amperes @ 100% depth of discharge) @ 20 hour rate | |||||
| Maximum AC Ripple (Charger) | 0.5% Rms or 1.5% of float charge voltage recommended for best results. | |||||
| Maximum voltage allowed = 1.4% RMS (4% P-P). | ||||||
| Maximum current allowed = 3.75 amperes RMS (C/20). | ||||||
| Self Discharge | Dynasty UPS batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required. For higher temperatures the time interval will be shorter. | |||||
| Accessories | Inter unit connectors, racks and cabinet systems are available. | |||||
| Terminal | "L" terminal with 0.28" clearance hole to accept 0.25" (6mm) bolt. | |||||
| Terminal Hardware Initial Torque | 40 in.-lbs. (4.5 N-m). | |||||
| Terminal Hardware Annual Retorque | 32 in.-lbs. (3.48 N-m). | |||||


|
Note:
|
Batteries to be mounted with 0.5 in (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. |
Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0103, BAT0103, BATA-103, BAT0-103 12 volt 75 Amp Hour (AH) replacement battery
|