|
|
|
Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Flame-arresting one-way pressure-relief vent for safety and long life. | |
| Thermally welded case-to-cover bond to eliminate leakage. | |
| Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance. | |
| Computer-generated grid design optimized for high power density. | |
| UL-recognized component. | |
| Multicell design for economy of installation and maintenance. | |
| Can be mounted in any orientation. | |
| Not restricted for air transport – Complies with IATA/ICAO Special Provision A67. | |
| Not restricted for surface transport – Classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189. | |
| Computer designed lead, low calcium alloy grid for minimal gassing and ease of recycling. | |
| Case and cover available in both standard and flame retardant polypropylene. | |
| Flame retardant polypropylene case and cover compliant with UL 1778 (optional). |
![]()

|
* All dimensions in
inches and (millimeters). All dimensions are for reference only.
|
|
Specifications
|
||||||||
|
Cells
Per Unit |
Voltage
Per Unit |
Weight
|
Electrolyte
|
Maximum
Discharge Current |
Short Circuit
Current
|
Ohms Imped.
60 Hz |
||
|
3
|
6.42
|
72 lbs.
33 kg . |
Absorbed H2SO4
SG = 1.300 |
800 Amps
|
4350 Amps
@ 0.1 sec. |
0.0015 Ohms
|
||
|
Capacity |
620 watts per cell at the 15 minute rate to 1.67 volts per cell at 77°F (25°C). | |||||||
| 200 Ah @ 20 hr. rate to 1.75 volts per cell @ 77°F (25°C). | ||||||||
| 170 Ah @ 10 hr. rate to 1.80 volts per cell @ 20°C (68°F). | ||||||||
| Operating Temperature Range | Discharge; -40°F (-40°C) to +160°F (71°C) | Charge;
-10°F (-23°C) to +140°F (60°C). (with temperature compensation) |
||||||
|
Nominal Operating
Temperature Range |
+74°F (23°C) to +80°F (27°C). | |||||||
|
Float Charging Voltage
|
6.75 to 6.90 VDC/unit Average at 77°F (25°C). | |||||||
|
Recommended Maximum
Charging Current Limit |
C/5 amperes (40 amperes @ 100% depth of discharge) @ 20 hour rate. | |||||||
| Equalization and Cycle Service Charging Voltage | 7.2 to 7.4 VDC/unit Average at 77°F (25°C). | |||||||
| Maximum AC Ripple (Charger) | 0.5% RMS or 1.5% P-P of float charge voltage recommended for best results. | |||||||
| Maximum voltage allowed = 1.4% RMS (4% P-P). | ||||||||
| Maximum current allowed = 9 amperes RMS (C/20). | ||||||||
| Self Discharge | Dynasty UPS batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required. For higher temperatures the time interval will be shorter. | |||||||
|
Accessories |
Inter unit connectors, racks and cabinet systems are available. | |||||||
|
Terminal |
"L" terminal with 0.28" clearance hole to accept 0.25" (6mm) bolt. | |||||||
|
Terminal Hardware Initial Torque |
75 in.-lbs. (8.5 N-m). | |||||||
| Terminal Hardware Annual Retorque | 60 in.-lbs. (6.8 N-m). | |||||||

|
Note:
|
Batteries to be mounted
with 0.5 in (1.25 cm) spacing minimum and free air ventilation.
Specifications subject to change without notification.
|
Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery Eaton Powerware Best Power BAT-0050, BAT0050, BAT0-050 6 volt 200 Amp Hour (AH) replacement battery
|