Switching Transient

800-706-7009

Home • Up • Electrical Line Noise • Frequency Variation • Harmonic Distortion • Overvoltage • Power Failure • Power Sag • Power Surge • Switching Transient • Undervoltage

Buy batteries on-line

Battery chargers, rectifiers, dc power systems by SENS Battery Chargers

Click for more about the Battery Rack™ 20 with Tester (Grey) Battery Storage

Specials!

Service

Lease Info

Instantaneous Under voltage
( Notch ) in the Range of Nanoseconds

Cause

Normal duration is shorter than a spike and generally falls in the range of nanoseconds.

Effect

May cause erratic behavior in some equipment, memory loss, data error, data loss and component stress.

Solution

Protect your critical equipment with UPS and TVSS

Switching Transients Definition: Switching transients take place when there is a rapid voltage peak of up to 20,000 volts with a duration time of 10 MicroSeconds to 100 micro seconds. They are commonly caused by arcing faults and static discharge. In addition, major power system switching disturbances initiated by the utilities to correct line problems may happen several times a day.

Home - 9 Power Problems - Problems with Power - APC - Powerware - MinuteMan - MGE - Liebert - Batteries - Chargers / Rectifiers - Emergency Lighting - Service - Factory Links

Power Factor Inc.

2526 Manana Dr – Suite 102 – Dallas – Texas – 75220

NO DISSATISFIED CUSTOMERS!

Since 1995

While every precaution has been taken to ensure accuracy and completeness in this literature, Power Factor Inc. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners.